|Posted on Tuesday, November 26, 2002 - 8:44 pm: ||
Hi, im going to be buying a RCI 2995 DX in a couple of weeks and was wondering if anyone could tell me what the mod for 11 meters is for it.Thanks, Travis.
|Posted on Tuesday, November 26, 2002 - 11:59 pm: ||
Take cover off and look for board with several jumpers on it.
You will see a two hole plug going to board and right next to it you will see an empty space with two pins.
Move jumper to those two pins and you got it.
"Actually if you have Copper do a "Peak & Tune & Open" it will have a SEAL on it covering warrenty."
If you do it yourself and break the seal and something goes wrong later down the line, you are stuck!
It's well worth the extra $30.00 to know you are covered. And when you get it, it will be ready to go.
Just my thought's.
|Posted on Wednesday, November 27, 2002 - 12:40 am: ||
Uhh, 808, have you changed over a "DX" radio yet? The jumper pins are not active on the "DX" CPU like it was on all the earlier radios.
If he doesn't get his "dongle" with the 3-pin socket on the end of the wires, he is SOL with one of these. I'm seeing more and more posts from folks who got the radio, but no dongle, and no way to obtain one by itself. I still haven't found anyone offering that by itself.
|Posted on Wednesday, November 27, 2002 - 6:57 am: ||
Thanks 808, I think I will let copper do it for the reasons you stated. That way I will have no problems thanks again, Travis.
|Posted on Monday, December 02, 2002 - 11:47 pm: ||
2600, i can get you all you need.
|Posted on Tuesday, December 03, 2002 - 7:46 pm: ||
On my radio i do not have any jumps at all.... when i do jump i go from 21-29.699 and then the other jump locks cb channels along with the a channels.... i beleive i have the 10z board and not the 11z... who knows?? (nothing shorted on mine to go from 24-32)